How exactly do you use a fabric puller? Let's study it together with me.
Time: 2023-06-03 View: 1
1. Turn on the power, enter the main interface, set the required quantity, length, direction of cloth release, and return the machine to the home position (Note: This operation must be operated).
2. Set the length of cloth pulling, fix the press cloth frame so that the press cloth frame is fixed firmly and cannot move.
3. After the machine is zeroed, walk once with no load to verify that the position of the fabric press bar and the length of the machine are accurate.
4. Lift the fabric onto the fabric hopper, pull out the head of the fabric about 40cm on the fabric support pole.
5. Determine the way of spreading the fabric in the sub-interface (double or single pull).
6. Adjust the rising amount (0.04-0.10) according to the thinness of the fabric, set the cutting width and cutting speed, and set the deceleration distance before and after, so that the machine may stop smoothly at the back of the front end and the back end.
7. Open the cloth stabilizing lever, hit the cloth supporting lever from the cloth hopper to the front end of the machine, press and hold the manual uncloth button when the lever hits the middle of the machine.
8. Open the press cloth horse head, dial out the pin on the cloth rod, turn the round rod of the cloth rod clockwise, slide the cloth from the cloth rod to the cloth feed roller, press "release cloth" to open the automatic release function.
9. Press down the head of the press cloth horse, press the "cloth", make the cloth slide down from the cloth slide plate, press the "cut" to cut the cloth head flat.
10. Press "start", the machine enters into automatic operation, at this time to check the tightness of the cloth, adjust the tightness to the appropriate position.
11. According to the fabric, record the elasticity of the cloth, the speed of pulling the cloth, back to the car speed, cutting parameters and other related data, saved in the machine recipe inside, the next time you use, directly call the corresponding formula.
Daily maintenance of fabric pulling machine
1. Dust the machine every day, and remove the debris on the walking platform and walking wheels before starting the machine.
2. Check whether the sensors work normally before automatic operation.
3. Check whether the chain, gear, synchronous wheel and other transmission parts are loose every week.
4．Check the chain every month to see if it is properly loosened or tightened, and adjust the loosening or tightening.
5. Lubricate the chain and sprocket every month.
*** Translated with www.DeepL.com/Translator (free version) ***
